THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
ABSTRACT
Mechanical engineering department of the named institute has many non operational machines sequel to this fact maintenance which resulted to non development and non maintenance of the institute community at large.
By this fact the project (mechanical lawn mower) was constructed and design to help in the development and maintenance of institution, community and the society at large in the area of grass cutting in our environment and the improvement in our food production and also the reduction of manpower.
In other words, during the construction and design of this project many things were put into consideration such as our environmental condition, effectiveness of the machine and also maintenance were well observed and a minimized cost of maintenance and a highly successful repair was adopted and also the appropriate tools cost and quality of material were well consider.
CHAPTER ONE
INTRODUCTION
In the past, cutting of grasses in the schools, sports track, or field, industries hotels, pubic center, etc was done by cutlass this method of manual cutting is time consuming a s it is human effort that is needed for cutting, there was also inaccuracy in cutting level using the manual cutting system.
Apart from all these old method of cutting there is also risk of accident.
The problems of the manual was meant to be overcome with the aid of this project (the construction of a mechanical lawn mower) which is used for cutting of grasses to equal height or level for speedy cutting.
This project lawn mower, is also the accident free as well, it reduced labour and also reduced number personnel that is needed in a particular operation, it also reduced man power as it an internal combustion engineer that dose the actual cutting while the operator provides the efforts, great portion of land can easily be cut with lawn mower.
Again to encourage beauty in our environment this project was embarked on to help in keeping our environment clean because most labourers are finding it difficult in handily tool for gasses cutting. It is also used for cutting sports field, (like foot ball pitch as well as crowns in hotel and business premises so this project reduces human effort and should be encouraged in school, hotel, business area, etc although mowers can be of electric type too, but we decided to fabricate a mechanical type to overcome the problem of electricity and as such this our lawn mower can be used every where even were there is no electricity.
IDENTIFICATION OF NEED
Early before now, West Africa as a whole, the peasant farmer depends on the hoe and cutlass for practically all farm operation. There tools vary in shape and size from place to place in the high forest zone of Nigeria the small farmer must clear thick bush every three or four years. All this job is being done either hoe or cutlass for weeding of farm land. These farm operation depend entirely on the energy of the farmer using the tools which he has at this disposal. This inability that facing the farmer, has triggered these project group to research into the lasting solution to the problem.
Also, with meant development in the country, daily labour in farm operation is highly exorbitant for the farmer to afford but with these project
DOWNLOAD COMPLETE PROJECT MATERIALÂ
