BASIC SOIL TEST ON SUB- GRADE  SOIL MATERIAL & FLEXIBLE PAVEMENT DESIGN ON ROAD LINKING – UGWUAJI AND CAMPUS M, IMT; ENUGU, ENUGU STATE

0
479

CHAPTER ONE

COLLECTION OF SAMPLES AND LABORATORY TESTING PROGRAM

The test carried out in this project was on distributed soil sample.

This implies collecting soil samples that are disfigured their natural shape.

 Soil samples were collected on three (3) trial pit along Ugwuaji and Campus 111 IMT Enugu. A total of three (3) samples were collected from the trial pits (one from each pit) using pick are and spade. The samples were taken at 1.0m depth in each pit. The samples were put in polythene bags and labelled A, B, C. The samples were spread on the floor of the soil laboratory and stones removed for seven (7) days to allow for air drying.

The laboratory testing program comprises mechanical analysis, compaction test and atterberg limit tests, and the California bearing ratio (CBR) test.

          The objectives of the laboratory testing program were

  1. To obtain a general information regarding the nature of the soil and their variation with depth throughout the length of the road under consideration.
  2. To obtain information regarding the strength characteristics of the soil.
  3. To obtain information which will enable engineers to group soils according to their appearances of the purposes of complying different soils.