CONSTRUCTION OF 2,000 LITRES CAPACITY WATER RE-SERVOIR.
ABSTRACT
In the construct of 2,000 litres capacity water reservoir galvanized steel sheet forms the tank and an angle iron rod forms the stand. Two full length galvanized sheet were marked out and cut out to the required sizes. The work stated by cutting the it gauges galvanized steel sheets of full length into geometrical dimensions of the cylindrical shape
After cutting, the different of the sized were assembled and joined together by using 12- guage electrode on are holding machine. The complete holding of the parts with the exist piping were ensured.
The top of the tank has a circular shape opening for the entering of water which is covered with the constructed over. in order to provide rigid foundation two angled iron was cast and assembled together which is the constructed support base.
The 2,00 litres capacity water reservoir is designed for effective storage and transfer of water through the tap control which allow the easy flow of water through the tank
TABLE OF CONTENTS
Introduction (Chapter one)
Literature review (Chapter two)
Construction Method (Chapter three)
Conclusion and Recommendation (Chapter four)
References.
CHAPTER ONE
INTRODUCTION
Reservoir are ponds or lakes built for the storage of water usually by the construction of a dam across river. The size of reservoir needed is a function the water demands, the natural flows of the rive impounded and the extent of droughts to be removed
In areas of moderate rainfall storage may be required during only few days or weeks in a year. In and or semi and areas, storage capacity may be needed to supplement low stream flow over period of many months even years. In some instance water can be divided by gravity flow or by pumping from one river to a reservoir on another stream. Water supplies can be taken be from the reservoir directly or water may be released from the reservoir to augment river flows past a water supply intake downstream.
