Site icon Modish Project

CONSTRUCTION OF A 5KVA HYBRID INVERTER

ABSTRACT

The increasing demand for energy, the continuous reduction in existing sources of fossil fuels and the growing concern regarding environmental pollution, have pushed engineers, industries, researchers and to other experts in the power sector to explore new technologies for the production of electrical energy which is clean and renewable. The system will be able to produce 5KVA solar power that will be able to power some devices. The solar system is to have a maximum voltage of 13.0V with a current capacity of 200AH since two panels is used which has 100AH each. The system was tested for a load of 50W for which it worked accordingly.

TABLE OF CONTENTS

Title Page    –        –        –        –        –        –        –        –        –        i

Certification         –        –        –        –        –        –        –        –        –        ii

Dedication –          –        –        –        –        –        –        –        –        –        iii

Acknowledgements-       –        –        –        –        –        –        –        iv

Abstract –   –        –        –        –        –        –        –        –        –        v

Table of Contents –        –        –        –        –        –        –        –        vi-ix

CHAPTER ONE

INTRODUCTION

  1. Background of the Study-       –        –        –        –        –        1
    1. Statement of the Problem        –        –        –        –        –        2
    1. Aims and Objectives      –        –        –        –        –        –        2-3
    1. Significance of the Project       –        –        –        –        –        3
    1. Limitation and Problem of the Project        –        –        –        4

CHAPTER TWO

LITERATURE REVIEW

2.7.1  UPS Module         –        –        –        –        –        –        –        18

2.7.2  Battery Module    –        –        –        –        –        –        –        18

2.7.3  Battery Charger   –        –        –        –        –        –        –        18-19

2.7.4  Output Power Transformer     –        –        –        –        –        19

2.7.5  Display and Controls    –        –        –        –        –        –        19

2.7.6  Battery Assembly          –        –        –        –        –        –        –        20

CHAPTER THREE

RESEARCH METHODOLOGY

3.5.1  Driver Section –    –        –        –        –        –        –        –        40

3.6     Principles of Operations          —       –        –        –        –        –        40-41

CHAPTER FOUR

          RESULT ANALYSIS

CHAPTER FIVE

CONCLUSION AND RECOMMENDATION

          References

Exit mobile version