THE DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASE TALKING SYSTEMS

1
896

THE DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASE TALKING SYSTEMS

 

ABSTRACT

This text is a report on the design and construction of a microcontroller base talking systems. The design was base on integrated circuit technology with discrete component only coming in a peripherals if detail description of this design procedure is presented in this text. This design is broken into several modules. These include the regulated power supply module, the sensory module and the switching module. The acting of each of these modules is coordinated by the intelligent controller unit. The NC can perform d/f task depending upon the program that they have store inside it. The project is design in such a way to monitor an intrude or thrift at bases room, when nobody is on duty. And if and if an intruder is detected, the system will start talking thereby alerting the user (security men around) to confront the intruders. The general tasting packaging and problems encountered were highlighted in this project. As a result of this simulated model of this project was carried out using software.

 

CHAPTER ONE

INTRODUCTION

A proposal project for the construction of a Microcontroller Based Talking Baby System  for baby protection of life security is an essential port of living. A necessary check to fellow man in ordinate desire to give birth to children.

It’s for this reason hospital and care centre or motherless baby home employ the use of a talking baby system for baby protection with human intervention. This system will trigger immediately it sense an unauthorized or unwanted individual or group from gaining access into baby-room, when it’s set on a voice alert mode. The significance art of protecting babies necessitates the design and construction of this project a talking baby system for baby protection with sufficient intelligence that is capable of providing utmost needed security for baby.

1.1       OBJECTIVES OF THE REPORT

The aims of embarking on this project are as follows:

  1. To produce a software base system which will replace a hardwired system at this time that hardware components are very costly and at time very difficult to get.
  2. To serve as a guide to automating any system in future at this time that automation is the best approach to life.
  3. It will enhance safety of users and prevents the intruders.
  4. It will help to regulate the rate of entry by controlling the timing of signaling device place at the control room and baby room.

 

DOWNLOAD COMPLETE PROJECT MATERIAL

THE DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASE TALKING SYSTEMS

Leave a Reply