ABSTRACT
Detail survey of State Government College, Ikot Ekpene was the study area of this research project. It has an approximate area of 2.78436 hectares. The project started with a reconnaissance survey involving (office and field recce diagram). In the field control were established with the used of handheld G.P.S Map 60csx receiver. Therefore,data acquisition (perimeter survey and detailing) were done with the use of total station (sanding version 10.06.29) perimeter survey to know the area was done with traversing as a method of survey and detailing of features and structures were done by resection method.
In the office, area calculation, reduction and deduction of angles were done and necessary corrections were apply and production of plan was done with the use of AutoCAD software and HP Computer.
TABLE OF CONTENTS
Certification – – – – – – – – ii
Approval Page – – – – – – – – iii
Dedication – – – – – – – – – iv
Acknowledgements – – – – – – – v
Abstract – – – – – – – – – vi
Table of Contents – – – – – – – vii-ix
CHAPTER ONE
- Background of the Study – – – – – 1-2
- Statement of Problem – – – – – – 3
- Aim and Objectives – – – – – – 3
- Study Area – – – – – – – – 4
- Scope of the Study – – – – – – 4-5
- Significance of the Work – – – – – 5-6
- Definition of Terms – – – – – – 6-9
CHAPTER TWO: REVIEW OF RELATED LITERATURE
2.1 Definition of Detail Surveying – – – – 11-12
2.2 Method with which Detail Surveying can be Carried out 12-13
2.3 Ground Surveying Method – – – – – 14-19
2.4 Photogrammetry Method – – – – – 20-21
2.5 Remote Sensing Survey Method – – – – 21-22
2.6 Detail Surveying Plan – – – – – – 22-23
- Aerial Surveying Method – – – – – 23
CHAPTER THREE: METHODOLOGY/DATA ACQUISITION
3.0 Introduction – – – – – – – 24
3.1 Reconnaissance – – – – – – – 24-26
3.2 Personnel Used – – – – – – – 26
3.3 Instrument Test – – – – – – 26
3.4 Temporary Adjustments – – – – – 27-28
3.5 Instrument Test – – – – – – 28-29
3.6 Detailing – – – – – – – – 30
3.7 Perimeter Survey (Traversing) – – – – 30-31
- Precaution Observed – – – – – – 31
3.9 Challenges Encountered – – – – – 31
CHAPTER FOUR: DATA PROCESSING AND ANALYSIS
4.1 Angular Reduction – – – – – – 32-33
4.2 Backward Computation – – – – – – 33-35
4.3 Area Computation – – – – – – 35
4.4 Plan Production – – – – – – – 36
CHAPTER FIVE: SUMMARY, CONCLUSION AND RECOMMENDATONS
- Summary – – – – – – – – 37
- Recommendation – – – – – – 37-38
5.3 Conclusion – – – – – – – – 38
References
Appendices
Reconnaissance Diagram
Computation Sheet
