ABSTRACT
The research work in the rate of cooling of Engine Oil samples have been carried out. From the results, it was observed that sample A (Mobil Oil) has the highest rate of cooling of 1.428oC/min, followed by sample C (Total Oil) which is 1.3oC/min and followed by sample B (Tonimas Oil) which is 1.12oC/min followed by sampled D (A-Z Oil) which is 0.93oC/min. These values of the rate of cooling for the selected Sample of engine oil (Mobil Oil, Tonimas Oil, Total Oil and A-Z Oil) can be used to secret the best oil for motor vehicles. This is because, when the temperature goes higher, the coolant temperature will rise thereby affecting the optimal performance of the engine. Hence from this research finding, Mobil oil (Sample A) is recommended because o f its fast cooling rate.
TABLE OF CONTENTS
Title Page – – – – – – – – – – i
Certification – – – – – – – – – – ii
Dedication – – – – – – – – – – iii
Acknowledgement – – – – – – – – – iv-v
Abstract – – – – – – – – – – vi
Table of Contents – – – – – – – – – vii-viii
CHAPTER ONE: INTRODUCTION
- Background of the Study – – – – – – – 1-3
- Aim and Objective of the Study – – – – – 3
- Scope and Limitation of the Study – – – – – 3
- Definition of Terms – – – – – – – 3
CHAPTER TWO: LITERATURE REVIEW
- Literature Review – – – – – – – – 4
- Heat Capacity or Thermal Capacity – – – – – 4-6
- Properties of Specific Heat Capacity – – – – – 6-8
- Measurement of Heat Capacity – – – – – 8-9
- Factors that affect Heat Capacity- – – – – – 10-12
CHAPTER THREE
- Materials and Method – – – – – – – – 13
- Method/Procedure- – – – – – – – 13
- Apparatus – – – – – – – – – 13
- Method/Procedure – – – – – – – 13-14
- Method/Procedure- – – – – – – – 13
CHAPTER FOUR
- Results and Discussion – – – – – – – 15
- Results – – – – – – – – 15-21
- Discussion – – – – – – – – – 22
CHAPTER FIVE: SUMMARY, CONCLUSION AND RECOMMENDATION
- Summary, Conclusion and Recommendation – – – 23
- Summary – – – – – – – – – 23
- Conclusion – – – – – – – – – 23-24
- Recommendations – – – – – – – – 24
References
