REPAIR AND RECOMMISSIONING OF PROCESS HEAT TRANSFER APPARATUS

0
799

REPAIR AND RECOMMISSIONING OF PROCESS HEAT TRANSFER APPARATUS

 

ABSTRACT

The repair and recommissioning of the process heat transfer apparatus was done in the pilot plant of chemical engineering department of institute of management and technology (IMT) Enugu. The repair work was done under the supervision  and direction  of an experienced technician the repair work was initiated by troubleshooting which revealed the faulty parts of the apparatus, then followed by the search of material for construction of the damaged parts and reconstructioning of parts, polishing and Assembling of the parts, Electrical wiring which was performed by an electrician. However, the construction and reconstructioning of the parts was done in the mechanical engineering  pilot plant of Institute of Management and Technology (IMT) Enugu. The following parts were repaired. Electric motor, electric pump switches (I, 2,3 and 4), ceiling rose, hose, clips, plug and bolts. As the end of the repair, the process heat transfer apparatus become functional and can be used to perform practical works in determining the rate of heat  transfer and equality of heat transferred from one source or body to another this report contains the steps (procedures) taken to achieve the aims as stated under aims  and objectives of the project.

 

DOWNLOAD COMPLETE PROJECT MATERIAL

 

REPAIR AND RECOMMISSIONING OF PROCESS HEAT TRANSFER APPARATUS

Leave a Reply