CONSTRUCTION OF A SHAPED STEEL CUPBOARD
CONSTRUCTION OF A SHAPED STEEL CUPBOARD
ABSTRACT
A cupboard in its proper term. Is a well shaped structure, which could either be rectangular, square or...
CONSTRUCTION OF A ELECTRICAL BLENDER MACHINE
CONSTRUCTION OF A ELECTRICAL BLENDER MACHINE
ABSTRACT
Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists...
CONSTRUCTION OF A PILOT MOTORISED MIXER A REPORT PRESENTED TO THE...
CONSTRUCTION OF A PILOT MOTORISED MIXER A REPORT PRESENTED TO THE DEPARTMENT OF CHEMICAL ENGINEERING OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU
ABSTRACT
A motorized...
DESIGN AND OPERATION OFA SHELL AND TUBE HEAT EXCHANGER
DESIGN AND OPERATION OF A SHELL AND TUBE HEAT EXCHANGER
CHAPTER ONE
INTRODUCTION
The most common type of heat exchanger used in industry contains a number of...
THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION & PRODUCTION...
THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION & PRODUCTION OF EMULSION PAINT
ABSTRACT
The major aim of this project research work is to produce...
COMPARATIVE ANALYSIS OF COAL AND COCONUT ACTIVATED CARBON
COMPARATIVE ANALYSIS OF COAL AND COCONUT ACTIVATED CARBON
ABSTRCT
The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used...
THE EFFECT OF LIQUID FLOERATE AND GAS FLOWRATE ON A PACKED...
THE EFFECT OF LIQUID FLOERATE AND GAS FLOWRATE ON A PACKED ABSORPTION TOWER AND REPAIR OF EQUIPMENT
ABSTRACT
The purpose of the project is to study...
FORMULATION AND PRODUCTION OF LEVERA SOAP
FORMULATION AND PRODUCTION OF LEVERA SOAP
ABSTRACT
The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer...
FABRICATION OF CANDLE MOULD WITH TWENTYFOUR (24) HOLES.
FABRICATION OF CANDLE MOULD WITH TWENTYFOUR (24) HOLES.
ABSTRACT
The candle mould has twenty four (24) holes which could produce twenty four (24) quality candle sticks...
PRODUCTION OF PLANT MIRROR USING LOCAL RAW MATERIAL
PRODUCTION OF PLANT MIRROR USING LOCAL RAW MATERIAL
ABSTRACT
This project “production of plane mirror using local raw material” is meant to study the possibility of...
PROCESSING OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING...
PROCESSING OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.
ABSTRACT
The production of cassava flour by the method of traditional processing method (sun...
CONSTRUCTION OF A SIMPLE SIZE REDUCTION MACHINE
CONSTRUCTION OF A SIMPLE SIZE REDUCTION MACHINE
ABSTRACT
This project (Construction Of A Simple Size Reduction Machine) It was constructed locally with the use of local...
THE STUDY AND ANALYSIS OF WATER POLLUTION
THE STUDY AND ANALYSIS OF WATER POLLUTION
ABSTRACT
This seminar studied and analyzed Water Pollution, the causes, the effects, the sources, types and control of Water...
THE RATE OF BLEACHING OF PALM OIL WHITE COAL.
THE RATE OF BLEACHING OF PALM OIL WHITE COAL.
ABSTRACT
This project was carried using activated local form local corporation Enugu, and the rate of bleaching...
CONSTRUCTION OF KEROSINE COOKING STOVE
CONSTRUCTION OF KEROSINE COOKING STOVE
Abstract
The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was...
